EasyManua.ls Logo

Biostar TA790GX A3 PLUS - Page 11

Biostar TA790GX A3 PLUS
67 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TA790GX A3+
9
B. Memory Capacity
DIMM Socket
Location
DDR3 Module
Total Mem ory
Size
DDR3_A1 256MB/512MB/1GB/2GB/4GB
DDR3_B1 256MB/512MB/1GB/2GB/4GB
DDR3_A2 256MB/512MB/1GB/2GB/4GB
DDR3_B2 256MB/512MB/1GB/2GB/4GB
Max is 16GB.
C. Dual Channel Memory installation
Please refer to the following requirements to activate Dual Channel
function:
Install memory module of the same density in pairs, shown in the table.
Dual Channel Status
DIMMA1
DIMMB1 DIMMA2 DIMMB2
Enabled O O X X
Enabled X X O O
Enabled O O O O
(O means memory installed, X means memory not installed.)
The DRAM bus width of the memory module must be the same (x8 or
x16)

Related product manuals