Biostar TZ68A - DRAM Timing Control

TZ68A+ UEFI BIOS Manual
28
Spread Spectrum
This item allows you to control Spread Spectrum function.
Options: Auto (Default) / Disabled / +/- 0.20 / +/-0.25 / +/-0.375 / +/-0.50
DDR3 DRAM Multiplier
This item allows you to set DDR3 DRAM Multiplier.
Options: Auto (Default) / 10.67 / 13.33 / 16 / 18.67 / 21.33
DRAM Timing Control
This item allows you to choose to manually or automatically regulate the DRAM
Timing.
Options: By SPD (Default) / Manual / XMP Profile 1 / XMP Profile 2
DRAM Command Rate
This item allows you to select command rate of DDR3.
Options: Auto (Default) / 1T / 2T
CAS# Latency (tCL)
This item allows you to select CAS Latency of DDR3.
Optio ns: 9 (Def a ult) / 3 ~ 15
Row Precharge Time (tRP)
This item allows you to select Row Precharge Time of DDR3.
Optio ns: 9 (Def a ult) / 3 ~ 15
RAS# to CAS# Delay (tRCD)
This item allows you to select Row Address to Column Address Delay of DDR3.
Optio ns: 9 (Def a ult) / 3 ~ 15