Biostar X670E VALKYRIE User Guide

2. Advanced Menu | 13
X670E VALKYRIE
2-2 ACPI Settings/WakeUp Event control
System ACPI Parameters and Wakeup event control.
2-2-1 Enable Hibernaon
This item enables or disables system ability to Hibernate (0S/S4 sleep state). This opon may not
be eecve with some 0Ss.
2-2-2 ErP Control
When ErP Enabled. System meets ErP requirment. All wake up events do not work except Power
Buon aer power down system(S5).
2-2-3 ACPI Sleep State
This item selects the highest ACPI sleep state the system will enter when the SUSPEND buon is
pressed.
2-2-4 Restore AC Power Loss
Specify what state to go to when power is re-applied aer a power failure.
2-2-5 PME Wake up from S5
The item enables the system to wake from S5 using PME event.
2-2-6 Wake system with Fixed Time
This item enables or disables the system to wake on by alarm event. When this item is enabled,
the system will wake on the hr::min::sec specied.
2-2-7 Wake up date/ hour/ minute/ second
Wake up date
You can choose which date the system will boot up.
Wake up hour / Wake up minute / Wake up second
You can choose the system boot up me, input hour, minute and second to specify.

Biostar X670E VALKYRIE Specifications

General

Brand	Biostar
Model	X670E VALKYRIE
Category	Motherboard
Language	English