Contents
TurboVap
®
User Manual
CONTENTS
System Overview
1 Evaporation Modes
1 Manifolds
2 Racks and Tube Sizes
2 Water Bath
2 Gas Vortex Shearing Action
2 Ventilation
3 Sleep Mode and Automatic Wake-Up
3 Audible Alarm and Lighting
Determine Optimal Evaporation Conditions
4 Determine the Appropriate Water Bath Temperature
4 Determine the Appropriate Gas Flow
5 Determine the Appropriate Evaporation Mode
Define System Settings
6 Sleep Mode and Automatic Wake-Up
7 Calibrate the Water Bath Temperature
Prepare the system
8 Change the Manifold
8 Adjust the Water Level
9 Adjust the Nozzles
9 Set the Water Bath Temperature
Evaporate
10 Set Up and Start an Evaporation Run
11 Monitor an Evaporation Run
11 Edit an Evaporation Run in Progress
11 End of an Evaporation Run
11 Pause or Abort an Evaporation Run
11 Unload the Samples
Define Methods
12 Edit or Rename a Method
12 Evaporation Parameters
Maintenance
13 Clean the Exterior of the System
13 Clean the Racks and Manifolds
13 Clean the Water Bath
14 Replace a Multi Rack Height Adjustment Handle
14 Replace a Multi Rack Vial Spring
14 Replace a Nozzle
14 Replace an End-Point Sensor
14 Replace the Fuse
15 Long Term Storage
Troubleshooting
16 End-Point
16 Evaporation
16 Gas Supply
16 Sleep Mode and Automatic Wake-Up
16 Water Bath
General Information
17 Accessories and Spare Parts
17 Manufacturer
17 Contact Us
To Next Page
