To Next PageTo Next Page
Need help?Do you have a question about the Biral AX 13-1 and is the answer not in the manual?
Staff must have appropriate qualifications for assembly, operation, and maintenance tasks.
Non-compliance can lead to danger for persons, plant, environment, and loss of claims.
Eliminate risks from electric power, observe regulations like CENELEC and I.E.E.
Ensure installation/maintenance is by qualified personnel; works at standstill, reconnect safety devices.
Install after welding/soldering; prevent water on motor; install housing without current.
Describes correct orientation of terminal box and shaft, avoiding upward facing box.
Details on connecting the pump to the mains supply, including voltage and fuse.
Provides a diagram for connecting the pump to the power supply with fuse.
Explains control keys and different operating modes (proportional, constant pressure/speed).
General| Maximum operating pressure | 10 bar |
|---|---|
| Voltage | 230 V |
| Frequency | 50 Hz |
| Connection size | 1.5 inches |
| Inlet/Outlet Size | 1.5 inches |
