To Next PageTo Next Page
Need help?Do you have a question about the Biral AX 10 Series and is the answer not in the manual?
General| Brand | Biral |
|---|---|
| Model | AX 10 Series |
| Category | Water Pump |
| Language | English |
General information importance for assembly, operation, and maintenance of the equipment.
Explains safety markings and symbols used in the instructions to indicate danger.
Ensures personnel undertaking tasks have appropriate qualifications and competence.
Highlights dangers to people, plant, environment and loss of claims from non-compliance.
Emphasizes observing safety information, accident prevention regulations, and internal rules.
Addresses elimination of risks from electric power according to relevant regulations.
Operator's responsibility to ensure authorized personnel perform works after thorough study.
Reconstruction or changes require manufacturer consultation; genuine parts ensure safety.
Operating reliability depends on appropriate application and not exceeding limit values.
Specifies requirements for heating water and permissible water/glycol mixtures.
Details permissible water temperature, operating pressure, and ambient temperature limits.
Recommendation to drain, flush, and refill system to avoid operational interruptions.
Instructions for rinsing piping before antifreeze filling and selecting materials.
Guidance on installation after welding, preventing water contact with motor, and wiring.
Specifies correct orientation of pump housing and terminal box; shaft must be horizontal.
Guidance on pump setup with a fitted return valve and sluice gate installation.
Details minimum pressure requirements for bearing lubrication at various temperatures.
Details on connecting the pump to the mains supply, including voltage and protective conductor.
Diagram showing mains connection, supply voltage, and back-up fuse for pump wiring.
Adjusting control settings and feed height for optimal pump operation and system performance.
Details the default factory settings for proportional pressure and automatic night reduction.
Performance curves showing head, flow rate, and power consumption for AX 10 pumps.
Performance curves showing head, flow rate, and power consumption for AXW 10 pumps.
Performance curves showing head, flow rate, and power consumption for AX 12/AXW 12 pumps.
Performance curves showing head, flow rate, and power consumption for AX 13/AXW 13 pumps.
Steps for system flushing, filling, de-aerating, and initial pump operation.
Automatic venting of the pump motor space; brief running dry is permissible.
Checks for the LED indicator and power consumption display during operation.
Procedure for deblocking if the motor starts with high torque.
Information on heat insulation for pumps for average temperatures between 15°C and 110°C.
Details on the shut-off set comprising a non-return valve and a ball valve.
