32
english
11. Specifications
Supply voltage: 1×230 V +6/-10%, 50 Hz
Motor protection: No external motor protection is necessary
Degree of protection: IP 44
Winding class: Classe d’isolation F
Temperature class: TF 110
Ambient temperature: max. 40 °C
Media temperature: +15 °C to 95 °C
The temperature of the medium must be higher
than the ambient temperature to prevent condensation water
from forming in the terminal box and the stator.
up to 75 °C water temperature 0,05 bar
at 90 °C water temperature 0,30 bar
at 110 °C water temperature 1,10 bar
For every ±100 m altitude ±0,01 bar
Pression de service nécessaire: 10 bar
Noise: sound pressure level under 54 dB(A)
Leakage current: The power line filter of the pump causes a leakage current
to the ground wire of less than 3.5 mA during operation.
Minimum pressure
at 500m altitude:
Ambient temperature Media temperature
°C Min. °C Max. °C
15 15 110
30 30 110
35 35 90
40 40 70
12. Disposal
This product and the special electronic components (lead-free)
must be disposed of in accordance with the environmental
regulations.
It is recommended to keep the temperature
below 65 °C in drinking water installations
to prevent the danger of lime deposits.
Warning
To Next Page
Loading...
Need help?
General
