Need help?Do you have a question about the birddog PLAY and is the answer not in the manual?
General| Form Factor | Compact |
|---|---|
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% non-condensing |
| Video Output | HDMI |
| Network | Ethernet (RJ-45) |
| NDI Support | Full NDI |
| Power | 12V DC |
| Control | Web UI, NDI |
| Audio Output | HDMI Embedded |
| Network Connectivity | Ethernet |
Ensures account security by recommending strong passwords and clarifies document disclaimers.
Details FCC Part 15 compliance for digital devices and potential radio frequency interference.
Supports new NDI® 5 functions, including high bandwidth NDI®, HX2, and HX3.
Enables reception of NDI® streams in resolutions up to 4Kp60.
Details the compact dimensions (85x85x19mm) and light weight (97g) of PLAY.
Describes the magnetic base for easy mounting behind TV screens.
States that PLAY is powered via USB-C for enhanced flexibility.
Allows using a TV remote to browse and play NDI® sources via built-in CEC.
Lists supported APIs including RESTful, Crestron, Zoom, and Q-SYS.
Illustrates the device's ports and controls: On/Off, Remote Sensor, USB Power, HDMI, Ethernet.
Explains the USB-C power connection and its voltage/current specifications.
Instructions for connecting PLAY to power, TV via HDMI, and network via Ethernet.
Steps to access the BirdDog web interface using the PLAY's IP address and default password.
How to select an NDI® source using a CEC compatible TV and its remote control.
Instructions for selecting an NDI® source through the BirdUI interface via AV Setup.
Guidance on changing the default password for enhanced security in the BirdUI.
An overview of the organization and panels within the BirdUI interface.
Detailed steps for changing the BirdUI password to prevent unauthorized access.
Instructions for downloading and installing the latest firmware for product improvement.
Button to restart the PLAY unit, typically after network or name changes.
Adding IP addresses manually to enable visibility of devices on different subnets.
Restricting communication by assigning devices to specific NDI® groups.
Device settings for OSD, HDMI timeout adjustment, and restarting the decode engine.
Method to mute or unmute the audio stream from an NDI® source.
Selecting an available NDI® source from the list for decoding.
Configuring an alternative NDI® source for automatic switching upon interruption.
Option to select a genlock source for video synchronization.
Button to confirm and save changes made to the decode settings.
To Next Page
