Channel assembly (3334-4003) EZ Flow
AS16005
AS16120
Channel assembly, 37.5”
AS16120EZ
Channel assembly, 37.5”- EZ Flow
AS16217R
Hinged base door - old style
AS16217R-3
AS1120EZ
AS16273
AS16273-S275
AS16275
AS16335X
Upper hinge plate assembly, SS
AS415D
Stationary bar assembly, SS
AS116-22-COS
Saw guide bar assembly, 22”, special
Saw guide bar assembly, 22”, Al head
AS130
A19-1
AS16Z
A16003U-6
A16003UDF-6
AS116-22
A16003U335-6
Upper wheel assembly w/ hinge plate
A16003UDF335-6
A16112
AS16290
Steel cleaner assembly, rear, SS
A16155
Meat carriage assembly
A16155EZ
Meat carriage assembly, EZ-ow
A16163-1
Stationary platter assembly
A16200
Carriage stop assembly, movable
A16220-1
Carriage stop assembly, xed
AS16132
A16278
A175S
Thumb guard assembly
A181155EZ
A211-COS
Finger lift assembly, removable, SS head
A227
Upper bearing cup/cone assembly
A247
Upper shaft and bearing assembly
A247-1
AS249R
Base door lock assembly, right, SS
A211-SS
Meat gauge release assembly
A295
Wheel cleaner assembly
A363
Lower bearing cup/cone assembly
A602
Saw guide assembly, upper
A262
Head & door assembly, SS
Hinged base door - new style
Meat gauge bracket assembly
Meat gauge assembly
Meat gauge plate assembly
Cleaning unit stamping assembly
Steel cleaner assembly, SS
Ratchet assembly
Upper wheel assembly w/o hinge plate
Head door latch assembly
Guide bracket saw cleaner assembly
Upper shaft and bearing assembly less spacer
A16360
A16361
Lower shaft bearing assembly
A16547
Lower bearing housing assembly, w/o wheel
Lower bearing housing assembly, w/o wheel
hinge plate
Upper wheel assembly, double ange with
hinge plate
Upper wheel assembly, double ange, w/o
Meat gauge plate assembly, less release
Meat carriage assembly(3334-4003) EZ-ow
Finger lift assembly, removable, special
COMPLETE ASSEMBLIES FOR MODEL 3334
Description
Item No.
Description
Item No.
44
Saw guide bar assembly, 22”, SS head
AS116-22SS
AS16006
Head door assembly, SS
A16005
Head & door assembly, Aluminum
A16006
Head door assembly, Aluminum
A16163-E
Stationary platter assembly, England
A16196
Tension spring assembly
Finger lift assembly, removable, Al head
A211-AL
Aluminum slide gib assembly
A260
Stationary bar assembly, use AS415D
A415D
Saw guard on head door assembly
A661-1
Upper wheel hinge bracket assembly
A71-1
MODELS EQUIPPED WITH STAINLESS STEEL FABRICATED HEADS
Stainless steel heads became available (as optional equipment) starting with Ser. #23265. From Ser. #23265
to Ser. #25059 and starting again with Ser. #36272, these stainless steel heads were mated to the base structure
in the same fashion as the aluminum head using the Item #260 slide gib. From Ser. # 25060 to Ser. #36251 the
machined blocks were eliminated and the slide gibs redesigned to a dovetail conguration to secure the head.
(The Factory Does Not Recommend Field Conversions)
PARTS EXCLUSIVE TO 3334SS WITH OPTIONAL STAINLESS STEEL HEAD STRUCTURE
S16005
Ser. # 25059, replaced by S16005C
Head, SS, 1st design, Ser. #23265 to
Description
Item No.
Description
Item No.
S16005B
Ser. # 36251, (uses dovetail slide gibs)
Head, SS, 2nd design, Ser. #25060 to
replaced by S16005C and 2 ea. #260
S16005C
present, (uses #260 slide gibs)
Head, SS, current design, Ser. #36272 to
S16006
Head door, SS, all SS heads
16260ZA
Ser. # 36251, no longer available
Slide gib, dovetail type, Ser. #25060 to
16662
all SS heads
Saw guard on saw guide bar, SS
To Next Page
Loading...
