cooling liquids may easily give rise to scalding.
◆ Lubricating system
Don’t touch high-temperature lubricating oil with your skin to prevent any scalding. Make sure that
pressure has been discharged from the system before you start to work with the lubricating system.
Don’t start or operate the engine when the filling cap of lubricating oil is not closed to avoid the danger
of lubricating oil ejection.
◆ Electric welding
Firstly, remove the battery positive and negative cable. Then, disconnect all the cables connecting to
the charging generator. The electric welding clamp must be fixed to the components to be welded while
approaching to the welding point as close as possible. Don’t fix the electric welding clamp on the
engine or have current go through any bearing. Once the welding task is completed, be sure to securely
connect the cables for charging generator and control module before connections of battery cables.
To Next Page
Loading...
