To Next Page
N
Nathan SchneiderJul 27, 2025
Why won't my Bissell Vacuum Cleaner pick up dirt?
- CClarence CoxJul 27, 2025
If your Bissell Vacuum Cleaner isn't picking up dirt, several factors could be at play. Ensure the pod is securely seated, clicking into place. Dirty filters can also be a culprit; remove and rinse the pre-motor filters, allowing ample drying time before reinserting, and dust off the post-motor filter. Check for clogs in the vacuum or hose, removing any obstructions. Also, make sure the Dirt Container is correctly seated. If there's a crack or hole in the Main Hose, you’ll need to order a replacement from the BISSELL website. Ensure the Main Hose is properly connected. Finally, if hair is wrapped around the brush roll, run the vacuum back and forth on clean carpet to release it.
General
