Bissell CLEANVIEW 3197 Series - Whats in the Box; Vacuum Assembly

BISSELL.com 3
Base Wand Hose 2-in-1 Dusting
Brush & Crevice
Tool
Pet TurboEraser®
Tool
What’s in the Box?
Standard accessories may vary by model.To identify what should be included with your purchase,
please refer to the “Carton Contents” list located on the carton top flap.
Assembly
Go to support.BISSELL.com for assembly videos.
1. Attach wand to vacuum
base.
2. Attach stretch hose to wand
by twisting clockwise.
3. Attach stretch hose to
back of vacuum by twisting
clockwise.
4. Attach hose clip to the body
of the vacuum by clicking it
into place.
5. The hose should sit on the
vacuum without any twists,
like the image above.
6. Attach tools to tool holders.