BISSELL.com 3
4. Insert end of hose into back
of vacuum and twist right to
lock into place.
5. Wrap hose through hose
clip and connect hose wand
to the foot hose at bottom of
vacuum.
6. Attach desired tool.
The crevice tool is stored
inside the extension wand.
1. Turn ON ( ) vacuum using
power ( ) pedal and lean
back using recline pedal. When
finished, press pedal switch
again to turn OFF ( ). Return
to upright position.
2. Press the handle recline
pedal to lean your vacuum
back. Press pedal a second
time to recline further. When
finished, lean vacuum all the
way up to lock it into upright
position.
3. Vacuum can be raised or
lowered to adjust to different
types of flooring. Turn knob
towards desired flooring type.
If vacuum becomes difficult to
push, move to a higher setting.
Note: Some frieze and Berber carpets have long delicate fibers or threads that may be damaged by
rotating brush. Repeated strokes in the same area may enhance this condition.
Using Your Vacuum
Assembly (continued)
1. Press the tank release button
and pull handle to lift dirt tank
away from vacuum.
2. Holding dirt tank over a trash bin, press release button on
back to open tank and dump debris.
Snap bottom back into place when empty.
Emptying the Dirt Tank
To Next Page
Loading...
Need help?
General
