To Next Page
E
ewhiteAug 10, 2025
Why is my Bissell PROHEAT 2X REVOLUTION 15503 losing suction power?
- BbrenthansenAug 10, 2025
Loss of suction power in your Bissell Ultrasonic Jewelry Cleaner can occur due to several reasons: * The tanks may not be seated correctly. Try picking up both tanks and reseating them properly. * The Dirty Water Tank might be full. Empty the Dirty Water Tank if it has reached the maximum fill line. * The Clean Water Tank might be empty. Refill the Clean Water Tank if needed. * The Rubber Tab on the Dirty Water Tank might not be sealed tightly. Check the Rubber Tab and press firmly on all edges to secure it. * The Accessory Hose Door might not be closed tightly. Ensure the Accessory Hose Door is locked tightly in place. * The Nozzle might be clogged with pet hair or debris. Use the Nozzle Clean Out Tool to clean the nozzle.
General
