Bissell REVOLUTION PET PRO User Manual (English)

Other manuals for Bissell REVOLUTION PET PRO

Questions and Answers:

A
Ann GreenSep 9, 2025
What to do if water sprays from Rinse & Storage Tray of Bissell REVOLUTION PET PRO Vacuum Cleaner?
- C
  Carlos BowersSep 9, 2025
  If water sprays from the Rinse & Storage Tray of your Bissell Vacuum Cleaner, the tray may be too full. Only fill the tray with water to the fill line indicated on the tray. When using the Water Rinse Cup, only fill it with fresh water to the “water line” printed on the cup. Also, ensure the machine is not in the reclined position. Turn the power OFF and shift the handle into the upright position before using the tray.
M
Maurice GallowayAug 23, 2025
Why is my Bissell REVOLUTION PET PRO Vacuum Cleaner losing suction power?
- V
  vanessa44Aug 23, 2025
  If your Bissell Vacuum Cleaner loses suction power, several issues could be the cause. First, check if the Dirty Water Tank is properly seated. Then, ensure the Dirty Water Tank hasn't exceeded the maximum fill line; if it has, empty it. Also, make sure the rubber tab on the Dirty Water Tank is tightly sealed. Check that the accessory hose door is securely closed. If the nozzle is clogged with pet hair or debris, use the Nozzle Clean Out Tool. Finally, verify that the Brush Roll cover is fully snapped into place.
A
Anthony KimAug 25, 2025
Why does my Bissell REVOLUTION PET PRO have no suction power?
- R
  Ricky JenkinsAug 25, 2025
  A loss of suction power in your Bissell Vacuum Cleaner can occur due to several reasons. The dirty water tank may not be seated properly; ensure it's correctly fitted. The tank might be full, so empty it if it has reached the maximum fill line. Check the rubber tab on the dirty water tank to ensure it is sealed tightly. Also, verify that the accessory hose door is closed tightly and locked in place. The nozzle could be clogged with pet hair or debris; use the nozzle clean-out tool. Lastly, ensure the brush roll cover is fully snapped into place.
M
michaelgainesAug 26, 2025
Why is my Bissell REVOLUTION PET PRO not spraying through the foot of the machine?
- S
  smithrobertAug 27, 2025
  If your Bissell Vacuum Cleaner isn't spraying through the foot, it could be due to the following reasons: * The Clean Water Tank might be empty. Refill it. * The Clean Water Tank might not be completely seated. Turn the power OFF, then remove and reseat the tank.
F
floydmelissaAug 27, 2025
What to do if my Bissell Vacuum Cleaner CleanShot continues to spray when the machine is OFF?
- R
  rodriguezandrewAug 28, 2025
  If the CleanShot feature on your Bissell Vacuum Cleaner continues to spray even when the machine is turned OFF, it's likely that the CleanShot button is not in the “OFF” position. Press the CleanShot button to turn it off. When it is off, the button window will show the color red and a “O” symbol.
P
Pamela BrowningAug 29, 2025
Why is my Bissell REVOLUTION PET PRO not spraying through the hose and tool?
- A
  Amy KingAug 29, 2025
  If your Bissell Vacuum Cleaner isn't spraying through the hose and tool, it could be due to a few reasons: 1. The hose to your machine is not primed or may have lost prime. With the machine OFF and unplugged, remove Nozzle from the foot. Place a ball- point pen in the black cylinder next to the screw. When water bubbles up, remove the pen. Reassemble the Nozzle and hose. Hold end of hose below water level in tank to prime. With the Clean Water Tank full of water, the machine OFF and RECLINED, press the CleanShot button ON and wait for the CleanShot to drain for a few seconds; This will re-prime the machine. 2. The Clean Water Tank might be empty. Refill the tank. 3. The Clean Water Tank might not be seated properly. Turn the power OFF and reseat the tank.
B
bhopkinsSep 14, 2025
How to fix reduced or no spray through the foot of my Bissell REVOLUTION PET PRO?
- B
  Brian BryantSep 14, 2025
  If you experience reduced or no spray through the foot of your Bissell Vacuum Cleaner, the Clean Water Tank may be empty, so refill it. Also, the Clean Water Tank may not be seated completely; turn the power OFF, then remove and reseat the tank.
S
Susan LeeSep 12, 2025
How to fix no spray through the hose and tool on my Bissell REVOLUTION PET PRO Vacuum Cleaner?
- J
  Jason WilliamsSep 12, 2025
  If there is no spray through the hose and tool of your Bissell Vacuum Cleaner, the hose to your machine is not primed or may have lost prime. With the machine OFF and unplugged, remove the Nozzle from the Foot. Place a ballpoint pen in the black cylinder next to the screw. When water bubbles up, remove the pen. Reassemble the Nozzle and hose. Hold the end of the hose below the water level in the tank to prime it. With the Clean Water Tank full of water, the machine OFF and reclined, press the CleanShot button ON and wait for the CleanShot to drain for a few seconds; this will re-prime the machine. Also, the Clean Water Tank may be empty, so refill it. Ensure the Clean Water Tank is seated properly by turning the power OFF and reseating the tank.
K
Kathy RobinsonSep 7, 2025
How to fix no spray through CleanShot on Bissell Vacuum Cleaner?
- C
  Craig AndrewsSep 7, 2025
  If there's no spray through the CleanShot feature on your Bissell Vacuum Cleaner, start by checking if the Clean Water Tank is empty. Refill the tank if necessary. Also, ensure the Clean Water Tank is properly seated; turn the power OFF and reseat the tank. Make sure the machine is reclined by pressing the Recline Pedal and bringing the handle down. If the pump has lost its prime, turn the machine off and unplug it, then remove the nozzle from the foot. Place a ball-point pen in the black cylinder next to the screw until water bubbles up, then remove the pen and reassemble the nozzle.
O
ofergusonSep 4, 2025
What to do if Bissell Vacuum Cleaner has reduced or no spray?
- L
  Lisa JohnsonSep 4, 2025
  If there is reduced or no spray through the foot of your Bissell Vacuum Cleaner, the Clean Water Tank may be empty. Refill it. Alternatively, the Clean Water Tank may not be seated completely. Turn the power OFF, then remove and reseat the tank.

Bissell REVOLUTION PET PRO Specifications

General

Type	Upright
Tank Capacity	1 gallon
Cleaning Path Width	11 inches
Power Rating	6.8 amps
Heatwave Technology	Yes
Pet Hair Collection	Yes
Power Source	Corded Electric
Brush Roll Type	Dual DirtLifter PowerBrushes
Dirt Tank Capacity	1 gallon
Filter Type	Washable
Voltage	120V
Warranty	5-year limited
Surface Type	Carpet
Special Features	Express Clean Mode
Included Tools	3" Tough Stain Tool, Pet Stain Tool
Cord Length	25 feet