BISSELL.com 5
Getting Ready to Clean
Tools vary by model. To shop all tools and accessories, visit BISSELL.com/parts.
Attaching the Tool
1. Release the hose by twisting
the Quick Release Cable Wrap.
Unwind cable and plug into
outlet.
2. Release the Flex Hose from
the Hose Grip Bracket. Unwrap
completely from around the
machine.
3. Choose your tool and snap
on the end of the hose.
Before You Clean
1. Vacuum to remove loose dirt from area to be cleaned.
2. Spray any BISSELL® stain pretreat formula to soiled areas or stains.
3. Allow to sit for at least 3 minutes.
4. Clean following instructions below.
Choose Your Desired Tool
Tools vary by model.
15 cm Tool
Great for cleaning stairs
and larger furniture areas.
2-in-1 Crevice Tool
Best for narrow spaces
and crevices that are hard
to reach.
3-in-1 Tool
Made for tricky areas like
curves, corners and tread
of carpeted stairs.
To Next Page
Loading...
Need help?
General
