BISSELL.com 7
After-Cleaning Care
Go to support.BISSELL.com for how-to videos.
1. To remove the Dirty Water
Tank simply pull the top of the
tank to the right. Pull the tab
on the tank plug to open.
2. Carefully empty Dirty Water
Tank, as some water may
enter/drain from the center
float stack.
3. The float stack can be
removed from the Dirty Water
Tank for cleaning. Turn the cap
counter-clockwise to remove it.
Then pull the float stack outward
to remove from the tank.
4. Rinse with water until all
debris is removed and let air
dry.
5. Return the float stack to
the Dirty Water Tank. Ensure
all pieces are assembled, as
shown. Screw the cap back on
clockwise until tightened.
6. Close tank plug and replace
the tank on the machine. Push
the top of the tank into place
until you hear a “click”.
Cleaning the Tools
1. To disconnect the cleaning
tools, push down on the button
above the hose grip and pull
straight off. (Do NOT twist tool
to remove it.)
2. The front cover of most
tools can be removed for easy
cleaning. If so, you will see a
button on the top of the tool
that will allow you to slide the
tool cover off. Rinse with water
and air dry.
WARNING To reduce the risk of electric shock, turn power OFF and disconnect from electrical outlet before
performing maintenance or troubleshooting.
To Next Page
Loading...
Need help?
General
