BITMAIN ANTMINER 19 Series

S19 Pro Server Installation
Guide
Document Version 1.0
Apr. 2020
© Copyright Bitmaintech Pte.Ltd. 2007 – 2020. All rights reserved.
Bitmaintech Pte.Ltd. (Bitmain) reserves the right to make corrections, modifications, enhancements, improvements, and other
changes to its products and services at any time and to discontinue any product or service without notice.
Customers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All products are sold subject to Bitmain's terms and conditions of sale supplied at the time of order acknowledgment.
Bitmain warrants performance of its products to the specifications applicable at the time of sale in accordance with Bitmain's standard
warranty. Testing and other quality control techniques are used to the extent Bitmain deems necessary to support this warranty.
Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed.
Bitmain assumes no liability for third-party applications assistance. Customers are responsible for their products and applications
using Bitmain components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
Bitmain does not warrant or represent that any license, either express or implied, is granted under any Bitmain patent right, copyright
or other Bitmain intellectual property right relating to any combination, machine, or process in which Bitmain products or services
are used. Information published by Bitmain regarding third-party products or services does not constitute a license from Bitmain to
use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party
under the patents or other intellectual property of the third party, or a license from Bitmain under the patents or other intellectual
property of Bitmain.
Resale of Bitmain products or services with statements different from or beyond the parameters stated by Bitmain for that product
or service voids all express and any implied warranties for the associated Bitmain product or service and is an unfair and deceptive
business practice. Bitmain is not responsible or liable for any such statements.
All company and brand products and service names are trademarks or registered trademarks of their respective holders.

BITMAIN ANTMINER 19 Series Specifications

General

Chip Technology	7nm
Network Connection	Ethernet
Operating Temperature	0 - 40 °C
Dimensions	370mm x 195.5mm x 290mm
Voltage	200-240V AC
Model	Antminer S19, S19 Pro

Summary

Overview

S19 Pro Server Components

Identifies the main components and controller front panel of S19 Pro servers, including rear and front fans, controller, and power supply.

Specifications

Provides detailed technical specifications for the S19 Pro server, covering product glance and hardware configuration.

Setting Up the Server

Configuring the Server

Setting Up the Pool

Details how to configure mining pools, miner names, and passwords for the server, including pool priority.

Monitoring Your Server

Administering Your Server

Checking Your Firmware Version

Explains how to check the current firmware version installed on the server by accessing its backstage.

Upgrading Your System

Provides instructions on how to upgrade the server's firmware and highlights precautions for the process.

Modifying Your Password

Details the steps to change the server's login password for enhanced security and access control.

Restoring Initial Settings

Guides users on how to reset the server to its factory default settings using the reset button.

Environmental Requirements

Climatic Conditions

Specifies operating temperature, humidity, storage conditions, and altitude limits for server operation.

Site Requirements for Running Room

Outlines criteria for server room location relative to pollution sources and proximity to seaside.

Electromagnetic Environmental Conditions

Details requirements for avoiding interference from electrical and radio frequency sources.

Mechanical Active Substances

Specifies acceptable limits for sand and dust content in the operating environment.

Requirements of Corrosive Gas

Lists acceptable concentration limits for various corrosive gases in the operating environment.

Regulations

FCC Notice

Provides FCC compliance information and operating conditions for the device.

EU WEEE: Disposal of Waste Equipment

Information on responsible disposal of waste electrical and electronic equipment in the EU.

Taiwan ROHS

Details hazardous substance content compliance according to Taiwan regulations.