BITMAIN AntMiner L3+

L3+ Server
Installation Guide
Document Version 0.1
April 2017
© Copyright Bitmain Technologies Holding Company 2007 – 2022. All rights reserved.
Bitmain Cayman (hereinafter referred to as ‘Bitmain’) reserves the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice.
Customers should obtain the latest relevant information before placing orders and should verify that such
information is current and complete. All products are sold subject to Bitmain's terms and conditions of sale
supplied at the time of order acknowledgment.
Bitmain warrants performance of its products to the specifications applicable at the time of sale in
accordance with Bitmain's standard warranty. Testing and other quality control techniques are used to the
extent Bitmain

BITMAIN AntMiner L3+ Specifications

General

Manufacturer	BITMAIN
Model	AntMiner L3+
Hash Rate	504 MH/s
Power Consumption	800 W
Power Efficiency	1.6 J/MH
Chip Type	BM1485
Number of Chips	288
Operating Temperature	0 - 40 °C
Algorithm	Scrypt
Voltage	11.60 ~13.00V
Cooling	2 x 12038 fans
Network Connection	Ethernet
Dimensions	352mm x 130mm x 187.5mm
Chip Technology	28nm

Summary

Overview

L3+ Server Components

Identifies the main physical components and controller front panel of the L3+ server.

Specifications

Details the technical specifications of the L3+ server, including hash rate and power consumption.

Connecting the Power Supply

Setting Up the Server

Configuring the Server

Setting Up the Pool

Configures the mining pool URL, worker ID, and password for the server.

Modifying the Frequency

Adjusts the operating frequency of the L3+ server for performance tuning.

Monitoring Your Server

Administering Your Server

Checking Your Firmware Version

Verifies the current firmware version installed on the L3+ server.

Upgrading Your System

Provides instructions for upgrading the L3+ server's firmware.

Modifying Your Password

Guides on how to change the administrator login password for the server.

Restoring Initial Settings

Details the process for resetting the L3+ server to its factory default settings.