BITMAIN AntMiner L3+

L3+ Server Installation Guide
-- ‐
14
-
- ‐
Make sure that the L3+ server remains powered during the upgrade process. If power fails
before the upgrade is completed, you will need to return it to Bitmain for repair.
6. Administering Your Server
6. Administering Your Server
6.1 Checking Your Firmware Version
To check your firmware version:
1. In System , click the Overview tab.
2. File System Version displays the date of the firmware your server use. In the example below, the server
is using firmware version 20170120.
6.2 Upgrading Your System
To upgrade the server’s firmware:
1. In System, click Upgrade .