L3+ Server Installation Guide
4.
Configuring the Server
4.
Configuring the Server
4.1
Setting Up the Pool
To configure the server:
1.
click
General Settings
.
2.
Set the options according to the following table:
Enter the URL of your desired pool.
The L3+ server can be set up with three mining pools, with decreasing
priority from the first pool (pool 1) to the third pool (pool 3).
The pools with low priority will only be used if all higher priority pools are
offline.
Your worker ID on the selected pool.
The password for your selected worker.
3.
Click Save & Apply to save and restart the server.
To Next Page
Loading...
