L3+ Server Installation Guide
The file IPReporter.zip is supported by Microsoft Windows only.
The default DHCP network protocol distributes IP addresses automatically.
3.
Setting Up the Server
3.
Setting Up the Server
To set up the server:
1.
Go to the following site: https://shop.bitmain.com/support/download
2.
Choose ‘Others’ and download the following file: IPReporter.zip
3.
Extract the file.3.
4.
Rightm click IPReporter.exe and run it as Administrator.
5.
Select one of the following options:
■
Shelf, Step, Position – suitable for farm servers to mark the location of the servers.
■
Default – suitable for home servers.
6.
Click
Start.
To Next Page
Loading...
