BITMAIN ANTMINER S19 Pro+ Hydro

S19 Pro+ Hydro Server Installation
- 11 -
3. Configuring the Server
3.
Configuring the Server
Setting up the Pool
To configure the server:
1. Click Settings as below.
2. Set the options according to the following table.
Option
Description
Mining address
Enter the address of your desired pool.
The S19 Pro+ Hydro servers can be set up with three mining pools, with
decreasing priority from the first pool (pool 1) to
the third pool (pool 3). The pools
with low priority will only be used if all higher priority pools are offline.
Name
Your worker ID on the selected pool.
Password (optional)
The password for your selected worker.
3. Click Save after the configuration.