CT-110-2 13
Requirements
• PC/mobile device
– equipped with the operating system Windows 7 or
newer
– with USB port
– with BEST SOFTWARE installed
The BEST SOFTWARE can be downloaded for
free from the BITZER website (www.bitzer.de).
• Data connection via BEST interface converter
Setting up communication (see figure 25, page 26)
• Plug the BEST interface converter into the SE-i1
(COM3) and the mobile device.
• Switch on the PC/mobile device and start the
BEST SOFTWARE.
• Click the NEW button (2) in the toolbar.
A window displaying the available devices opens.
• Select SE-i1 (3).
• Click the CONNECT button (4).
The SE-i1 is now connected to the PC/mobile device.
Configuring (see figure 14, page 13):
• Click the CONFIGURATION button on the left side and
call the respective page.
• Then, enter the corresponding compressor type in-
stead of the setting "SE-C1 Replacement" or "SE-C2
Replacement" for the compressor type.
• After that, specify the refrigerant and select "Yes/No"
for ECO operation.
• Click the TRANSMIT button and select and click TRANS-
MIT USER SETTINGS TO THE DEVICE.
See also the video/software tutorial on the BITZER
website www.bitzer.de at: SERVICE/SOFTWARE/
BEST SOFTWARE in the download area and see fig-
ure 14, page 13.
Fig.14: SE-i1 configuration
To Next Page
Loading...
Need help?
General
