32
●lift up the cover （ arrow deriction ）
to remove the cover from the central
adjuster completely ( Figure 32 ).
31
●Pull out the cover from both
sides.Hold the seat with one hand,
and pull the cover according to the
arrow’s direcction until you see a
small gap between the central
adjuster and the cover ( Figure 31 ).
●Drag the bolt Q out of the slot R,and
then lift up the cover （ arrow deriction ）
to remove it ( Figure 33 ).
33
R
Q
BC100B User Instruction
2120
BIUCO Car Seat
●Switch the handle to position C ( Page
8 Figure 1 ) . Find the clamp slot, release
the cover along the arrow’s direction
( Figure 29 ).
29
●Pull down the cover along the
arrow’s deriction ( O ). Release the
cover hook ( Figure 30 ).
Note：For safety reason,frequent removement
is not recommended.
elastic band
30
O
P
To Next Page
Loading...