BIUCO BC100B - Baby Fixation and Notes; Y-Shaped Belt Adjustment

2）Belt position standard:
●Keep the shoulder strap even or a
little bit lower than your baby’s
shoulder ( Figure 9 ）.
3）Y-shaped belt removement：
●loosen the straps as long as
possible.
●remove shoudler straps from the
metal splitter plate ( Figure 8 ).
●pull the shoulder straps from the
shoulder belt slots ( Figure 10 ).
9
4）Y-shaped belt installation：
●Pull the shoulder straps out of the
slots and reconnect with the metal
splitter plate ( Figure 11 ).
Note：Make sure both shoulder straps can
go through the slots fully and no belt
should be twisted。
11
10
Position adjustment
1）Position adjustment
●As your baby grows up, the shoulder
straps can be removed from the metal
splitter plate G ( on the bottom side of
this seat ) and relocated from slot J to
slot F ( Figure 8 ).
8
J
H
G
5.4 Baby fixation and notes
5.4.1 Y-shaped belt adjustment
Length adjustment
●Release---push and hold the central
adjuster button( Figure 6 E ) , then lift
up the shoulder straps ( Figure 6 F ).
Note：Do bot pull the shoulder pad.
●Fasten---pull the adjuster strap
( Figure 7 ).
BC100B User Instruction
1110
BIUCO Car Seat
shoulder strap
6
E
F
7