●To lock the straps, place the two
buckle tongues together properly,
then plug it into the buckle slot. A“
click”sound can be heard as a sign of
locked（ Figure 14 ）.
Note：the proper loaction of the buckle
is near your baby’s crotch not his/her
belly.
●Pull the adjuster strap through the
arrow direction ( Figure 15 ) to fasten
the Y-shaped belt. The proper tightness
is a two-finger space between the
shoudler strap and your baby’s chest.
5.5 Installation in vehicle
1）Switch the seat handle to “carrier
position”,then place this seat onto the
back row car seat near the vertical
cushion. The seat should be opposite
to the driving direction ( Figure 16 ).
15
16
2）Baby fixation
●Put your baby into the baby safety
seat,then put shoulder strap onto
baby’s shoulder gentely ( Figure 13 ).
Note：Do not twist or cross the shoulder
straps.
5.4.2 Baby fixation
1）Release the Y-shaped belt
●Place the seat on an even
surface,then adjust the handle to the“
balance position” （Page 8 Figure 1，
handle in position A）.
●loosen the shoulder strap as long
as possible ( Page 10 Figure 6 ).
●Push the red button on buckle to
release the belts.
●Put aside the buckle tongues
seperately ( Figure 12 ).
12
13
BC100B User Instruction
1312
BIUCO Car Seat
14
1
3
2
To Next Page
Loading...