BIXOLON SLP-D420E - 7 Appendix; Specifications

Rev. 1.04
- 28 -
SLP-D42**
7. Appendix
7-1 Specifications
Item
Description
Printer
Printing Method
Direct Thermal Printing
Dot Density
SLP-D420: 203 dpi (8 dot/mm)
SLP-D423: 300 dpi (11.8 dot/mm)
Printing Width
SLP-D420: Max 104 mm
SLP-D423: Max 105.7 mm
Printing Speed
SLP-D420: 152 mm/sec (6ips)
SLP-D423: 100 mm/sec (4ips)
Paper
Width
25 ~ 116 mm
Roll
Max 130mm
Core
25.4~38.1mm (1~1.5”)
AC
Adapter
Input Voltage
AC 100~240V
Frequency
50/60 Hz
Output Voltage
DC 24V
Usage
Conditions
Temperature
0 ~ 40 ℃ (Operating)
-20 ~60 ℃ (Storage)
Humidity
(except for paper)
10 ~ 80 % RH (Operating)
10 ~ 90 % RH (Storage)
※ Note
- Printing speed can vary depending on the data transmission speed and combination of
control commands.
- This equipment is indooruse and all the communication hiring are limited to inside of
the building.
- The switch is the disconnecting device. Turn off switch from any hazard.