BIXOLON SPP-R200 Reference Guide

Mobile Printer
Rev. 1.10
- 7 -
2-4 PowerValue (LONG R)
This attribute sets the battery capacity value of the printer. It can only be read, and is set
every time the status of the printer battery changes. The values of this attribute can be
recalled by using the GetPowerValue function.
Battery Capacity values are as follows.
Code
Value
Description
BXL_PWR_FULL
0
Battery charge status: 75% or higher
BXL_PWR_HIGH
1
Battery charge status: 50% or higher
BXL_PWR_MIDDLE
2
Battery charge status: 10% or higher
BXL_PWR_LOW
3
Battery charge status: under 10%
* Example
long lResult;
lResult = PrinterOpen(“portinfo…”, 1000);
……
CheckPrinter();
…...
int iPower;
iPower = GetPowerValue();
switch (iPower)
{
case BXL_PWR_FULL:
……
break;
case BXL_PWR_HIGH:
…….
break;
case BXL_PWR_MIDDLE:
……
break;
case BXL_PWR_LOW:
……
break;
}
…….

BIXOLON SPP-R200 Specifications

General

Brand	BIXOLON
Model	SPP-R200
Category	Printer
Language	English