BIXOLON SPP-R200II Reference Guide

Mobile Printer
Rev. 1.00
- 10 -
2-9 Power
This indicates the remaining battery capacity of the printer. It is read only and a change of
battery status is automatically shown.
Support Device : Mobile Printer
The remaining battery capacity status values are as follows.
Code
Value
Description
BXL_PWR_HIGH
0
Remaining battery capacity is 95%
BXL_PWR_MIDDLE
1
Remaining battery capacity is 85%
BXL_PWR_LOW
2
Remaining battery capacity is 50%
BXL_PWR_SMALL
3
Remaining battery capacity is 25%
BXL_PWR_NOT
4
Remaining battery capacity is less than 25%
2-10 State
This indicates the status of the printer. It is read only and the status of the printer is
automatically shown when printer status is checked by calling the CheckPrinter function.
Status values can be combined and each setting can be checked through bit operation.
Printer status settings are as follows.
Code
Value
Description
BXL_STS_NORMAL
0
Normal
BXL_STS_PAPEREMPTY
1
No paper
BXL_STS_CONVEROPEN
2
Printer cover open
BXL_STS_POWEROVER
4
Not enough remaining battery of printer
BXL_STS_MSR_READY
8
No printing
MSR read only mode
BXL_STS_PRINTING
16
Printer is printing or receiving data
BXL_STS_ERROR
32
Error in communication with printer
BXL_STS_NOT_OPEN
64
Open method of BXPrinterControl was not
called
BXL_STS_ERROR_OCCUR
128
Printer internal error
BXL_STS_NOT_CONNECTED
-1
Currently printer is not connected
2-11 Connection Control
This defines the type of printer connection.
Available settings are as follows.
Code
Value
Description
BXL_CONNECTIONMODE_AUTO
0
Automatic connect mode
BXL_CONNECTIONMODE_NOAUTO
100
Not automatic connect mode

BIXOLON SPP-R200II Specifications

General

Type	Mobile printer
Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Compatible operating systems	Windows XP/Vista/Server 2003/2008/7/8\\r OPOS\\r Linux CUPS
Flash memory	32 MB
Internal memory	64 MB
Built-in barcodes	1D, 2D, CODABAR (NW-7), Code 128 (A/B/C), Code 39, Code 93, EAN13, EAN8, ITF, MaxiCode, PDF417, QR Code, UPC-A, UPC-E
Maximum printing width	50 mm
USB port	Yes
Serial ports quantity	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired
Dimensions (WxDxH)	79.5 x 43.6 x 126.7 mm
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	-15 - 50 °C
Operating relative humidity (H-H)	10 - 80 %
Ethernet LAN	No
Battery voltage	7.4 V
Power source type	Battery
Battery life (max)	6.2 h