BIXOLON SPP-R200II Reference Guide

Mobile Printer
Rev. 1.00
- 13 -
Code DEFINE
Value
Description
10A6H
Successful execution of IC module
and RESYNCH
10A7H
PPS error
10A8H
IC module has already been set to IC CARD
mode
10B0H
PC link command is not supported
10E4H
The card has just sent an invalid “Procedure
byte”
10E5H
The card has interrupted an exchange
10E7H
Card returns an error
10F7H
Card is removed while executing a command
10F8H
Card is not useable because it is electrically
damaged
10FBH
Card recognition failure or car entry failure

BIXOLON SPP-R200II Specifications

General

Type	Mobile printer
Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Compatible operating systems	Windows XP/Vista/Server 2003/2008/7/8\\r OPOS\\r Linux CUPS
Flash memory	32 MB
Internal memory	64 MB
Built-in barcodes	1D, 2D, CODABAR (NW-7), Code 128 (A/B/C), Code 39, Code 93, EAN13, EAN8, ITF, MaxiCode, PDF417, QR Code, UPC-A, UPC-E
Maximum printing width	50 mm
USB port	Yes
Serial ports quantity	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired
Dimensions (WxDxH)	79.5 x 43.6 x 126.7 mm
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	-15 - 50 °C
Operating relative humidity (H-H)	10 - 80 %
Ethernet LAN	No
Battery voltage	7.4 V
Power source type	Battery
Battery life (max)	6.2 h