BIXOLON SRP-500 Installation Guide

www. samsungminiprinters.com
BIXOLON Samsung Serial printer
installation guide
1. Printer setting
1.1 Cable specifications (SRP-270, SRP-350, SRP-370/372)
- Use the serial cable that satisfies following specifications.
- If you don’t use incompatible cable, the printer may not work properly.
* Epson compatible cable mode
- IFA-S type and IFB-S type have Dip switch on the bracket
- Set the Dip switch on the interface card as following;
Bixolon Samsung compatible mode Epson compatible mode
1.2
Cable specification (SRP-275, SRP-500)
- Use the serial cable that satisfies following specifications.
- If you don’t use incompatible cable, the printer may not work properly
* Epson compatible cable mode
- IFC-S Type is compatible with both Bixolon Samsung and Epson cable specifications.

BIXOLON SRP-500 Specifications

General

Type	POS printer
Print speed	6.5 lps
Print technology	Dot matrix
Maximum resolution	208 x 96 DPI
Dimensions (WxDxH)	177 x 256 x 152 mm
Flash memory	8 MB
Built-in barcodes	CODABAR (NW-7), EAN13, EAN8, ITF-14, UPC-A, UPC-E
Autocutter durability	1.5 million cuts
Product color	Ivory
Maximum roll diameter	83 mm
Supported paper width	76.5 mm
Serial interface	Yes
Standard interfaces	Serial
Serial ports quantity	1
Connectivity technology	Wired
Operating temperature (T-T)	0 - 45 °C
Power source type	AC