BIXOLON SRP-E302 - Using Controller

SRP-E300/E302
Ver. 2.00
- 23 -
3-4 Using Controller
Explanation
Power LED
The Power LED light is on whenever the printer is on.
Error LED
Error LED is on when there is an error such as no paper
roll, open cover, etc.
Feed Button
Press the Feed button once to output one line of the
paper roll. Press the Feed button for more than
3 seconds to output the paper roll continuously.
If the printer does not power on, check that the adapter LED indicates
“ON” If the adapter LED is “OFF”, connect the adapter power