BIXOLON SRP-E302 - Specifications; Printer Specifications

SRP-E300/E302
Ver. 2.00
- 31 -
8. Specifications
8-1 Printer Specifications
Printing Method
Thermal printing
Dot Density
SRP-E300/E300ES: 180 dpi (7dots/mm)
SRP-E302/E302ES: 203 dpi (8dots/mm)
Printing Width
3-inch
72 mm
Roll Width
3-inch
79.5±0.5 mm
No. of Characters per Line
(Default Value)
SRP-E300/E300ES:
42 (Font A) ,56 (Font B), 56 (Font C)
SRP-E302/E302ES:
48 (Font A) ,64 (Font B), 64 (Font C)
Printing Speed
Max. 220 mm/sec
Receiving Buffer Size
4K bytes
Interface
SRP-E300/E302: USB
SRP-E300ES/E302ES: USB, Ethernet, Serial
Drawer kick-out Port
2ports (with Y-type cable)
AC/DC Adapter
Supply Voltage
Input Voltage
100~240 VAC
Frequency
50/60 Hz
Output Voltage
24 VDC
Environment
Condition
Temperature
Operating: 0 ~ 40 ℃
Storage: -20 ~ 60 ℃
Humidity
Operating: 10 ~ 80 % RH
Storage: 10 ~ 90 % RH
Paper excluded
Life Span
Printer Head
150 Km
Auto Cutter
1,500,000 cuts
The specifications were determined based on operation at normal
temperature using designated paper on default settings.
They are subject to change depending on temperature or printing level.
Printing speed may become slightly slower depending on
the data transmission speed and the combination of commands.