Rev. 1.03
■ Introduction
SRP-350/352III Series Printers are designed for use with electronic instruments such as
system ECR (Electronic Cash Register), POS (Point Of Sales), computer peripheral
equipment, etc.
The main features of the printer are as follows:
1. Print at a max. speed of 250mm/s
2. Low noise thermal printing
3. USB (embedded), serial, parallel, and Ethernet ports supported
4. Data buffer embedded (allowing receiving of print data even during printing)
5. Control of external devices such as cash drawer by peripheral units drive circuit
6. Bar code printing
7. Different print densities (through switches)
Please be sure to read the instructions in this manual carefully before using your new
printer.
※ Please use reliable original supplies!
We do not guarantee the quality and AS for any damage to the printer by using fake
supplies (or recycled ones).
We at Bixolon Co., Ltd. constantly strive to improve product functions and quality. To do
this, the specifications of our product and the contents of the manual may change without
prior notice.
To Next Page
Loading...
