1.2 Warning notice
6.083.98.5.14.00
GENERAL INSTALLATION
OPERATING
ELEMENTS
OPERATION/
SLICING
CLEANING
BLADE
SHARPENING
ACCESSORIES
OPERATING
CONDITIONS
The adjacent warning notice
serves for your own safety and
should be observed. Failure to
comply with it could result in
serious bodily injury.
For the space required, see the technical
data as per section 1.4.
When operating the machine, pay special
attention to all movable parts, especially to
the blade and carriage.
Prevent untrained personnel and
especially children from operating the
machine. Keep them away from the
operating area of the machine.
Persons with cardiac pacemaker implants
are recommended to consult their doctor
before operating the device (magnetic
field).
Do not tamper with any protective devices
of the machine. Do not remove, change or
bypass them. It may result in serious bodily
injury.
Operate concentrated.
Do not use the machine for products other
than stated in the operating instructions.
Do not cut frozen products.
Have damaged power cables immediately
replaced by a qualified and certified
electrician or the relevant BIZERBA
after–sales service.
Keep the working place clean and dry. Pro-
vide a non–slippery supporting area.
Keep the machine free of foreign objects.
Before cleaning the machine, always
disconnect the power cable from the
mains.
Immediately switch the machine off if there
is any rough operation or obstruction.
Contact the relevant BIZERBA after–sales
service if you cannot eliminate occurring
malfunctions yourself.
5
To Next Page
Loading...
Need help?
General
