Step 1
Remove the shipping plug from the outlet on the front of the machine.
8
Fig. 2
Step 2
Connect the high pressure hose to the machine outlet. To connect,
carefully insert the fitting with the o-ring into the high pressure outlet
and tighten the threaded nut by hand.
Step 3
Connect the garden hose to the connector on the back of the machine.
Before connecting, run water through the garden hose (not supplied)
to flush out any foreign matter. If your water source is a well, the
garden hose length can only be 30 ft. maximum.
Fig. 3
Fig. 4
OPERATING INSTRUCTIONS
To Next Page
Loading...
