8
ENGLISH
(Original instructions)
9
ENGLISH
(Original instructions)
Troubleshooting
Problem Possible cause Possible solution
Unit will not start. Battery pack not
charged.
Check battery pack charg-
ing requirements
Battery pack will not
charge.
Charger not plugged
in.
Surrounding air
temperature too hot or
too cold.
Plug charger into a work-
ing outlet.
Move charger and battery
pack to a surrounding air
temperature of above 40
degrees F (45ºC) or below
105 degrees F (+40.5ºC)
Unit shuts off
abruptly.
Battery pack has
reached its maximum
thermal limit.
Out of charge. (To
maximize the life of
the battery pack it is
designed to shutoff
abruptly when the
charge is depleted
Allow battery pack to cool
down.
Place on charger
and allow to charge.
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
u Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
u Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
u Regularly open the chuck and tap it to remove any dust
from the interior.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries accord-
ing to local provisions. Further information is available at
www.2helpU.com
Technical data
BCD001
Voltage V
DC
18
No-load speed Min
-1
0 - 600
Max. torque Nm 37
Chuck capacity mm
1-10
Max Drilling capacity
Steel/wood mm 10/25
Weight kg
0.8 (with battery 1.2)
Charger 90621477 90590289-05 90634972
Input voltage V
AC
230 230 230
Output voltage V
DC
18 18 18
Current mA 200 400 1A
Approx. charge
time
Hours 8 3 - 5 1.5
Battery
BL1518
Voltage V
AC
18
Capacity Ah
1.5
Type Li-Ion
Level of sound pressure according to EN 60745:
Sound pressure (L
pA
) 70.0 dB(A), uncertainty (K) 3 dB(A)
Sound power (L
WA
) 81.0 dB(A), uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN 60745:
Drilling into metal (a
h, D
) 1.2 m/s
2
, uncertainty (K) 1.5 m/s
2
Screwdriving (a
h
) 1.0 m/s
2
, uncertainty (K) 1.5 m/s
2
EC declaration of conformity
MACHINERY DIRECTIVE
%
BCD001 - Drill, Screwdriver
To Next Page
Loading...
Need help?
General
