EasyManua.ls Logo

Black & Decker BDCHD18 - User Manual

Black & Decker BDCHD18
92 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
www.blackanddecker.eu
1
8
7
2
34
6 9
5
BDCHD18

Table of Contents

Other manuals for Black & Decker BDCHD18

Preview: Manual
Manual8 pages
Preview: Original Instructions
Original Instructions80 pages

Questions and Answers

  • M
    mgarzaJul 27, 2025
    Why does the battery pack of my Black & Decker BDCHD18 not charge?
    • J
      Jennifer MartinJul 27, 2025
      If the battery pack of your Black & Decker Drill won't charge, there could be a couple of reasons. First, make sure the charger is properly plugged into a working outlet. Second, the surrounding air temperature might be too hot or too cold. Move the charger and battery pack to an area where the surrounding air temperature is above 40 degrees F (4.5ºC) or below 105 degrees F (40.5ºC).
  • A
    angela10Aug 12, 2025
    What to do if my Black & Decker Drill shuts off abruptly?
    • J
      Jeffrey MaxwellAug 12, 2025
      If your Black & Decker Drill shuts off abruptly, it's likely that the battery pack has reached its maximum thermal limit or is out of charge. To resolve this, allow the battery pack to cool down, then place it on the charger and allow it to fully charge.

Summary

Safety Instructions

General Power Tool Safety Warnings

Read all safety warnings and instructions to avoid electric shock, fire, and serious injury.

Electrical Safety

Use correct plugs, avoid grounded surfaces, and protect from rain or wet conditions.

Personal Safety

Stay alert, use PPE, prevent unintentional starting, and dress properly.

Tool Use, Care, and Drill Safety

Power Tool & Battery Use;Care

Drill Safety Guidelines

Specific safety measures for drill operation.

Product Features, Setup, and Operation

Charging the Battery

Operating Controls

Explanation of trigger switch, reversing button, and torque control.

Chuck, Gears, and Usage Tips

Chuck and Gear Operations

Drilling;Screwdriving Operation

Troubleshooting, Maintenance, and Data

Troubleshooting

Solutions for common problems encountered with the tool.

Maintenance

Technical and Environmental Data

Black & Decker BDCHD18 Specifications

General IconGeneral
Power SourceBattery
Voltage18V
Battery TypeLithium-ion
Chuck Size10 mm
No Load Speed0-650 RPM
Max Torque30 Nm
Drilling Capacity (Wood)25 mm
Drilling Capacity (Steel)10 mm
Drilling Capacity (Masonry)10 mm
Variable SpeedYes
Reverse ActionYes
Number of Gears1
TypeCordless Drill/Driver

Related product manuals