Black & Decker BEH850 - Drilling Modes and Technical Data; Selecting Drilling Mode; Technical Specifications; Sound and Vibration Levels

7
ENGLISH
(Original instructions)
Selecting the drilling mode (g. E)
uFor Impact drilling in masonry and concrete, set the
drilling mode selector (4) to the
q
position.
uFor drilling in steel, wood and plastics or for screw driving
set the operating mode selector (4) to the
r
position.
Accessories
The performance of your tool depends on the accessory used.
BLACK+DECKER accessories are engineered to high quality
standards and designed to enhance the performance of your
tool. By using these accessories you will get the very best
from your tool.
Maintenance
Your BLACK+DECKER corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
uSwitch off and unplug the appliance/tool.
uOr switch off and remove the battery from the appliance/
tool if the appliance/tool has a separate battery pack.
uOr run the battery down completely if it is integral and then
switch off.
uUnplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
uRegularly clean the ventilation slots in your appliance/tool/
charger using a soft brush or dry cloth.
uRegularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
uRegularly open the chuck and tap it to remove any dust
from the interior (when tted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be tted:
uSafely dispose of the old plug.
uConnect the brown lead to the live terminal in the new
plug.
uConnect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the tting instructions supplied with good
quality plugs. Recommended fuse: 5 A.
Protecting the environment
Separate collection. Products and batteries marked with this
symbol must not be disposed of with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
Further information is available at www.2helpU.com
Technical data
BEH850
Input voltage V
AC
230
Input power
W
850
No-load speed min
-1
0 - 3200
Impact rate min
-1
0 - 544000
Weight kg 2.0
Max. drilling capacity
Concrete mm 16
Steel mm 13
Wood mm 32
Level of sound pressure according to EN 62841:
Sound pressure (L
pA
) 101,5 dB(A), uncertainty (K) 5 dB(A)
Sound power (L
WA
) 112,5 dB(A), uncertainty (K) 5 dB(A)
Vibration total values (triax vector sum) according to EN 62841:
Impact drilling into concrete (a
h, ID
) 14 m/s
2
, uncertainty (K) 1,5 m/s
2
Drilling into metal (a
h, D
) 1, 4 m/s
2
, uncertainty (K) 1,5 m/s
2