Black & Decker BEPW1800T - Maintenance; Protecting the Environment

ENGLISH
30
Repairs

WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement) should be performed
by a BLACK+DECKER factory service center or a
BLACK+DECKER authorized service center. Always use
identical replacementparts
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid ahazard.
Accessories

WARNING: Since accessories, other than those
offered by BLACK+DECKER, have not been tested with
this product, use of such accessories with this tool
could be hazardous. To reduce the risk of injury, only
BLACK+DECKER recommended accessories should be
used with thisproduct.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
servicecenter.
• High pressure hose
1
can be stored coiled up and
secured on the handle
18
with the help of the hook and
latch strap
27
as shown in Fig.I.
• The spray handle
4
can be stored onto the rear of the
unit using the bracket
26
as shown in Fig.I.
• The spray wand
2
 can be stored onto the rear of the
unit using the bracket
26
as shown in Fig.I.
Storage (Fig. H, I)
• Store in a dry, covered location above freezing
temperature. STOREINDOORS.
• Always completely empty water from high pressure hose,
pressure washer unit, nozzles, and spray wand.
• Nozzles can be stored in theunit as shown in Fig.H.
NOTE: The turbo (BEPW2200) or pen to fan nozzles can
be stored on thewand.
• Power cord can be stored coiled up and secured with the
cord retaining hook
21
as shown in Fig.I.
Nozzle Cleaning (Fig. A, G)
If the nozzle becomes clogged with foreign materials, such as
dirt, excessive pressure may develop. If the nozzle becomes
partially clogged or restricted, the pump pressure will pulsate.
Clean the nozzle immediately using the nozzlecleaner.
1. Turn OFF and unplug the pressure washer unit
16
.
2. Turn OFF the watersupply.
3. Pull trigger
7
on spray handle
4
to relieve any
waterpressure.
4. Remove the nozzle from the spray wand
2
by
depressing the button
3
.
5. Using the nozzle cleaning tool
14
, unclog any debris
from thenozzle.
6. Run water from a faucet or garden hose through
thenozzle.
Filter Cleaning (Fig. A, L)
Inspect the filter
10
before each use and clean if necessary.
Remove the filter element and run under clear water to
remove anydebris.
Cleaning

WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the
risk of eye injury, always wear approved eye protection
when performingthisprocedure.

WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of the
tool. These chemicals may weaken the plastic materials
used in these parts. Use a cloth dampened only with
water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into aliquid.
MAINTENANCE

WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start-up can causeinjury.
Your BLACK+DECKER power tool has been designed to
operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends
upon proper tool care and regularcleaning.
10. Actuate the pressure washer by rotating the ON/OFF dial
to the ONposition.
11. Actuate the trigger of the spray handle to start
cleaningwork.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your BLACK+DECKER
product needs replacement, or if it is of no further use
to you, do not dispose of it with household waste. Make
this product available for separatecollection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the retailer
when you purchase a newproduct.