10
ENGLISH
(Original instructions)
WARNING: Inadequate extension cords can
be dangerous. If an extension cord is used,
it shall be suitable for outdoor use, and the
connection has to be kept dry and off the ground.
It is recommended that this is accomplished by
means of a cord reel which keeps the socket at
least 60 mm above the ground.
WARNING: Always switch off the mains
disconnecting switch when leaving the machine
unattended.
WARNING: Depending on the application,
shielded nozzles can be used for high pressure
cleaning, which will reduce the emission of
hydrous aerosols dramatically. However, not
all applications allow the use of such a device.
If shielded nozzles are not applicable for the
protection against aerosols, a respiratory mask
of class FFP 2 or equivalent may be needed,
depending on the cleaning environment.
Safety of others
This tool is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the tool by a person responsible for
their safety.
Children should be supervised to ensure that they do not
play with the appliance.
Labels on tool
The following symbols are shown on the tool along with the
date code:
Warning! To reduce the risk of injury, the user
must read the instruction manual.
f
Wear eyeprotection
g
Wear earprotection.
Machine not suitable for connection to the potable
water mains.
Never direct the water jet at people,
animals, the machine or electric
components
Electrical safety
This tool is double insulated; therefore no
earth wire is required. Always check that the
power supply corresponds to the voltage on the
rating plate.
Features
This appliance includes some or all of the following features.
1. High pressure hose
2. Spray wand
3. Nozzle button
4. Spray handle
5. Spray handle grip
6. Trigger lock-off
7. Trigger
8. Spray fan to pencil jet nozzle
9. Hose connector
10. Filter
11. Soap bottle
12. Soap bottle applicator
13. Hose connect button
14. Nozzle cleaning tool
15. Turbo nozzle (BEPW2200)
16. Pressure washer unit
17. ON/OFF dial
18. Handle
19. Retractable handle (BEPW1800T, BEPW2200)
20. High pressure water outlet
21. Cord retaining hook
22. Power cord
Assembly
Warning! To reduce the risk of serious personal injury, turn
unit off and disconnect it from power source before making
any adjustments or removing/installing attachments or acces-
sories. An accidental start-up can cause injury.
Attaching Handle (Fig. A)
BEPW1600L, BEPW1600LLP, BEPW1750
Press the handle (18) onto the pressure washer unit (16) and
secure with the screws supplied. Do not overtighten.
Attaching Spray Handle (Fig. B)
u To connect the spray handle ( 4 ) to the spray wand ( 2 ),
To Next Page
Loading...
Need help?
General
