To Next PageTo Next Page
Need help?Do you have a question about the Black & Decker GH710 and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Cutting Swath | 14 inches |
| Line Diameter | 0.065 inches |
| Rotating Head | Yes |
| Edge Guide | Yes |
| Voltage | 120V |
| Cutting Path | 14 inches |
| Feed Type | Automatic |
The guard must be installed to prevent motor overheating and ensure user safety.
Use only .065 inch diameter ROUND nylon line for optimal performance and to avoid motor strain.
Avoid bumping the feed head against the ground to prevent disruption of the feed mechanism.
Always use the cord retention feature to prevent the extension cord from becoming unplugged.
Always wear safety spectacles or goggles when operating the tool.
Ensure the guard is attached and wear appropriate clothing, footwear, and hair covering.
Keep clear of the rotating line and ensure all bystanders remain at a safe distance.
When edging, keep bystanders away and avoid ricochet by working carefully near solid objects.
Steps for securely attaching the guard to the motor housing for user protection.
Instructions for attaching the auxiliary handle for improved control and comfort.
How to adjust the trimmer's height using the collar for optimal working position.
Guide on using the built-in retainer to secure the extension cord to the trimmer handle.
Procedure for starting and stopping the trimmer using the trigger lever.
Technique for maintaining a 5-10 degree cutting angle and using the tip of the line.
Steps to convert the trimmer to an edger for precise boundary trimming.
Practical advice for effective cutting, including line usage, angles, and avoiding damage.
Information on using the correct .065 inch round nylon line and ordering replacement parts.
Detailed steps for removing and installing a new trimmer line spool.
Diagnosing and resolving issues where the trimmer operates at a reduced speed.
Troubleshooting for problems with the automatic line feed mechanism not advancing line.
Addressing situations where the trimmer feeds too much line, causing operational problems.
Tips to prevent cutting line from unraveling when the spool or cap is removed.
