To Next PageTo Next PageWhat to do if my Black & Decker Inverter is in thermal shutdown?
If your Black & Decker Inverter is in thermal shutdown, allow it to cool down. Also, make sure there is enough ventilation around it and that the load does not exceed 100 watts for continuous use.
Why does my Black & Decker Inverter shut off when I plug something in?
If the equipment you're operating is drawing too much power from your Black & Decker Inverter, reduce the load to a maximum of 100 watts.
What to do if AC output is shorted in Black & Decker Inverter?
If the AC output of your Black & Decker Inverter is shorted, unplug the AC appliance and disconnect the unit from the 12 volt DC power source. Check the appliance cord. Consult the Service Information section for further assistance.
How to fix low battery voltage on Black & Decker Inverter?
If the battery voltage is below 10.5 volts, recharge the battery or check the DC power supply.
General safety warnings and instructions for all inverters, covering usage, storage, and maintenance.
Specific warnings to prevent electric shock hazards when operating the inverter.
Specific warnings to prevent fire hazards associated with the inverter's operation.
Cautions to prevent personal injury and property damage during inverter use.
Step-by-step guide for connecting and operating the inverter safely.
General| Brand | Black & Decker |
|---|---|
| Model | PI120P |
| Category | Inverter |
| Language | English |
