Need help?Do you have a question about the Black & Decker BDPC200 and is the answer not in the manual?
General| Input Voltage | 12V DC |
|---|---|
| Output Voltage | 120V AC |
| Peak Power | 400W |
| Frequency | 60 Hz |
| USB Ports | 1 |
| Power Output | 200W |
| USB Output | 5V/2.1A |
| Protection | Overload, Overheat, Short Circuit |
Specifies the required 12 Vdc power source and warnings about voltage compatibility.
Details how to connect the inverter using the accessory plug or battery clamps.
Instructions for connecting to a 12V accessory socket, limited to 100 Watts output.
Instructions for connecting directly to a 12V battery using clamps for higher power outputs.
Details how to connect AC devices to the mains socket and USB devices to the USB port.
Alerts and automatic shutdown when input voltage drops below a safe level.
Automatic shutdown when input voltage exceeds the specified maximum limit.
Warns about reverse polarity or short circuits and potential damage to the appliance.
Automatic shutdown when the continuous load exceeds the rated wattage.
Automatic shutdown if internal temperature becomes too high, requiring cooldown.
Ensures the appliance is not exposed to water or other liquids during operation.
Recommends optimal ambient temperatures for appliance operation and longevity.
Ensures clear air circulation around the appliance to prevent overheating.
Advises against use near flammable materials or fumes due to sparking risk.
Step-by-step guide on how to remove and replace the fuse in the accessory plug.
To Next Page
