Black & Decker 200 WATT User Manual

VEHICLE POWER SYSTEM
200 WATT POWER INVERTER
WITH USB CHARGING PORT
INSTRUCTION MANUAL
Catalog Number PI200AB
PI200AB_ManualEN_060807.qxp 6/8/2007 4:48 PM Page i
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON PLEASE CALL
1-877-571-2391
BEFORE YOU CALL, HAVE THE CATALOG No,
AVAILABLE. IN MOST CASES, A REPRESENTATIVE
CAN RESOLVE THE PROBLEM OVER THE PHONE.
SAVE THIS MANUAL FOR FUTURE REFERENCE.

Black & Decker 200 WATT Specifications

Power

maximum continuous power	200 watts
surge capacity	400 watts
output voltage	Approx. 115 volt AC RMS 60 Hz
low voltage alarm	< 10.7 volts DC
low voltage shutdown	10.5 ± 0.3 volts DC

Ports & interfaces

usb output	5V DC( 300mA)
output connection	North American Standard Receptacles

Operating Environment

operating temperature	10-20°C (50-68°F)
storage temperature	0-40°C (32-104°F)
operating/relative humidity	5-95% non-condensing

Summary

GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL APPLIANCES

IMPORTANT SAFETY INSTRUCTIONS

HOW THIS INVERTER WORKS

OPERATING INSTRUCTIONS

Connection to Power Source

Details how to connect the inverter to a power source.

Connecting to a Power Source Using the DC Accessory Outlet Plug

Explains connection via the DC accessory outlet plug.

Connecting to a Power Source Using the Provided Battery Clips

Connects the inverter to a 12V power source using battery clips.

Direct Hardwiring to Power Source

Optional method to hardwire the inverter to a power source.

Connection To Load

Protective Features

CARE AND MAINTENANCE

Fuse Replacement

TROUBLESHOOTING

Common Power Output Problems

SPECIFICATIONS