Black arrow Prospero X-3 - Introduction; Connecting Your Prospero

I. Introduction
This guide describes the features and the user instructions for X-3 Prospero (Control Board –
Original Design) Miner
The X-3 Prospero Miner has inside one powerful MINION chip which can reach 100Ghash/s hash
rate (+/-10%) and has a very low power consumption. X-3 is contains a Control Board and is
very easy to control.
• Hashing rate ~1000Ghash/s
• Power consumption ~1000Watts (whole system)
• Power supply 110V/220V
II. Connecting your Prospero
STEP 1: Plug the Internet cable into the Ethernet port OR connect the WiFi antenna.
STEP 2: Plug the power cable into the power port.
2 | P a g e