To Next PageTo Next PageWhat to do if there is no video or LEDs on my Black Box Media Converter?
If there is no video or the LEDs are not working, double-check the power connection. Also, ensure that the firmware DIP switch is set to OFF (Down).
How to fix no audio on Black Box AVSC-VGA-HDMI-R2?
To resolve the issue of no audio, first check the settings to ensure they are correctly configured for analog/SPDIF. Also, note that audio from both inputs will prevent audio embedding.
Why is there a green tint over video from my Black Box AVSC-VGA-HDMI-R2?
A green tint over the video is usually caused by a bad or loose VGA cable. Try replacing or tightening the cable to resolve this issue.
General| Input Ports | VGA, 3.5mm audio jack |
|---|---|
| Output Ports | HDMI |
| Resolution Support | Up to 1920 x 1080 (1080p) @ 60 Hz |
| Audio Support | 3.5 mm stereo audio input |
| Power Supply | 5 VDC |
Details on approvals, audio support, enclosure, ESD, firmware, frequency, connectors, indicators, environment, power, dimensions, and weight.
Lists supported input and output resolutions for the AVSC-VGA-HDMI-R2 scaler.
Defines scalers and their purpose in converting video/audio signals for display compatibility.
Lists features like auto-detect, locking HDMI, IR control, OSD, deinterlacer, and wallmount design.
Details the items included in the product package: scaler, power supply, remote, manual, and software.
Describes the front and back panel components and their functions based on figures and tables.
Illustrates the typical application setup for connecting sources to the VGA to HDMI Scaler.
Configures output mode, default pattern, and audio source selection.
Adjusts contrast, brightness, saturation, hue, B/W extension, color tone, edge enhancement, and sharpness.
Controls under/over scan, aspect ratio, H/V mirroring, and input adjustments.
Provides In-Sync Info, Firmware Version, and Factory Reset options.
Explains how to use the physical buttons on the scaler for control.
Describes the functions of the IR remote control for operating the scaler.
Details how to configure the scaler using the Mini-USB port and provided software.
Lists typical issues and their corresponding fixes, such as power, cable, and audio settings.
Instructions on how to contact Black Box technical support for malfunctioning units.
Guidance on packaging the scaler for transport, return, or repair, including RA number requirements.
