Black Box CB-TOUCH7-T - Controlbridge 12 Wired Touch Panel Desk (CB-TOUCH12-T)

Page 9
877-877-2269 | blackbox.com
Chapter 2: Overview
2.4.2 ControlBridge 12" Wired Touch Panel Desk (CB-TOUCH12-T)
Speakers
Light sensor
LCD display
with touch
sensor
320 mm
153 mm
192 mm
Network connector
Microphone
Button System Default
Integrated tabletop stand
Proximity sensors
Figure 2-2.CB-TOUCH12-T.
Table 2-3. CB-TOUCH7-T and CB-TOUCH12-T components.
Component Description
Microphone The microphone is for future use. The functionality depends on a firmware version.
Proximity sensor The Motion sensor resumes touch panel from Backlight Saver mode. Enable/Disable this function
using On-Screen Display or Admin Control Panel.
Light Sensor The Light Sensor automatically adjusts display backlight according ambient light level.
This function has to be enabled using On-Screen Display or Admin Control Panel.
Touch-screen display Touch-screen display with active matrix color LCD and resistive touch membrane overlay.
Speakers Use the built-in stereo speakers to play sounds stored in the touch panels.
System Default Button When you press this button, the system resets to factory defaults. For details, see ythe Factory
Default and System Default chapter. You will need to use a thin screwdriver to press this button.
Network Connector The 10/100BASE-T LAN is a standard network connection equipped with Power over Ethernet an
using RJ-45 connector. For more details see the Connection chapter.