15
CHAPTER 3: Introduction
• Surge protection on CAT5 side
The extender resists surges on its CAT5 interface, adding a measure of
protection for itself and its attached devices, with an internal clamping voltage
of 15 volts.
• Rackmountable
You can use our rackmount kit (product code RMK19U-R2) to place extenders
in 1U of vertical space in a 19" rack. See Appendix B.
• Dual-Access model also supports a local station
With the Dual-Access model (ACU1005A), you can operate the computer
either locally or remotely (but not both at the same time).
We recommend that you read the remainder of this manual before you install the
extender in order to fully familiarize yourself with the product.
To Next Page
Loading...
